[미조립품｜레진바디｜2단 미션] 

1/10 XT4 4x4 Scale Crawler Kit w/Hard Body (크로스알씨 스케일 트럭)  90100095 

■구성품 : 자동차키트(2스피드미션/리모트 로킹디프) + 모터(540 35턴)
■별매품① : 변속기 + 조종기 + 조향서보(스탠다드) + 변속서보(미니서보 #97400883) + 로킹디프서보(미니서보 #97400883)
■별매품② : 배터리(수소 7.2V 또는 리포 2S-3S) + 충전기 + 조립/도색 용품 + 케미컬류(그리스+쇽오일)

■배터리 박스 크기 : 149 x 45 x 37mm 

■포장규격 : 54.5 x 39 x 19.5cm (규격C 113cm)

- 구성품 및 사양은 제조사 사정에 따라 사전 고지 없이 변경 될 수 있음
- 설명에 첨부된 제품 사진은 참조용으로 실제 키트의 구성품은 사진과 다를 수 있음

■실제모델
 - Chevrolet K30 Pick Up 

Two-speed all metal gearbox
Front and rear straight axles with CNC machined locked diffs
Full ABEC3 bearing kit
All-metal CNC machined shocks
1.9″ Mud Crawler high performance tires
Fully sealed engine compartment
Open cab design with plastic body
One-piece roll cage
LED lighting
Instrument lighting
Rear spare fuel tank
Adjustable front and rear seats
Quick release full-size spare tire
Large-capacity battery compartment

Features
The chassis isn’t a simple upgrade based on the DEMON. It’s a new design complete with essential changes. The new design not only improves the on the Demon model, but also gets optimization of the structure design, material and technology, utilizing new reinforced plastics and higher rated tolerance bearings improves the reliability and durability of the parts.

The XT4 all new chassis has been constructed with high grade reinforced engineering plastics and very rigid, also higher spec bearings throughout to add to its performance!

Improved reliability and durability of parts.
The XT4 new chassis has leading superiority in the multi-function and climbing performance! 

Drive system
The new truck is designed with low noise drive shaft and transmission shaft;
The 3-gear transfer case can be upgraded to Front and Rear unequal speed transfer case also for stage to enhance the climbing performance of special terrain. New develop axle with Differential lock. The differential with 4 + 2 gear structure cable type inlay differential lock, 1.2 reduction, front axle kingpin caster adjustable, Aluminum alloy CNC shock absorber; Double torque coil spring. CROSS RC NEW XT4 4X4 chassis isn’t simple upgrade based on the DEMON. It’s new design complete with essential
changes. It not only improves the issues on the Demon model, also get optimizes on the structure design, material and
technology, improve the reliability and durability of the parts.
The XT4 new chassis has leading superiority in the multi-function and clamber performance!

The suspension use multi link integral axle design.
The steel connecting rod, and the front axle is equipped with Panhard rod.
With 2 speed transmission, transfer case, differential lock and portal axle.

Newly developed low center of gravity transmission
The motor can be substituted with 540, 550 and 560 levels, and can also be substituted with the Hobbywing AXE crawler system.
The kit is equipped with 540 35T special climbing motor, Input gear compatible with 10T to 18T, final reduction ratio, the driven gear use double friction plate limited sliding structure; The driven gear use double friction plate limited sliding structure;
Powder metallurgy variable speed gear with integrated cutting technology, it’s solid and wear-resistant. 

Specifications
Overall Length: 520mm
Overall Height: 231mm
Wheelbase: 313mm
Width: 245mm
Ground Clearance (to axle pumpkin): 39mm
Ground Clearance (to chassis): 73mm
Tire Diameter : 115 x 45mm


Require
Radio Gear with receiver and servo, 4-channels recommended
Electronic Speed Controller
Battery: 6-cell flat or 2S Lipo
Charger: suitable for above battery
Tools and paints to complete R/C model


*Photos are for reference only