[엑시얼 레이스]  AXIAL 1/10 Wraith 1.9 4WD Brushed RTR, Orange AXI90074T1
  • [엑시얼 레이스]  AXIAL 1/10 Wraith 1.9 4WD Brushed RTR, Orange AXI90074T1

[엑시얼 레이스] AXIAL 1/10 Wraith 1.9 4WD Brushed RTR, Orange AXI90074T1

공유
판매가
499,000
구매혜택
할인 : 적립 마일리지 :
모델명
AXI90074T1
자체상품코드
AXI90074T1
배송비
0원 / 주문시결제(선결제) 조건별배송 지역별추가배송비
방문 수령지 : 경상남도 김해시 관동로27번길 133 재미코RC 2층
원산지
대만
색상

상품상세정보

 


Axial Wraith 1.9 1/10 4WD RTR

Introduction

The Axial® Wraith™ 1.9 4x4 is a new, 1/10 scale, ready-to-run platform that delivers it all - technical rock crawling prowess and detailed scale looks. Take the wheel and take command over mud, rocks, sand, and through any kind of backyard terrain!

Features

  • Strong tube chassis with forward-mounted battery position
  • Boatsides/skid plate for extra clearance
  • Chassis-mounted servo for a realistic look
  • Easy access to electronics, and adjustable battery tray
  • New body design with LED lights, and grille, radiator, fender, and V8 engine details
  • Spektrum™ Transmitter and Receiver
  • Licensed 1.9 Nitto Trail Grappler M/T tires on KMC XD229 Machete crawl wheels
  • Compact AX10™ transmission
  • AR44™ hi-pinion axles for added ground clearance
  • WB8 HD Wildboar™ driveshafts
  • Dual slipper clutch with 32-pitch gearing
  • 4-Link rear suspension

Needed to Complete
  • 2-3 Cell LiPo or 5-9 Cell NiMH/NiCd battery with IC3/EC3 connector
  • Compatible battery charger
  • (4) AA Alkaline batteries
What's in the Box?
  • (1) Axial Wraith 1.9 1/10 4WD RTR with:
    • (1) Spektrum™ SRX200 Receiver (installed)
    • (1) Tactic® TSX45 Metal Gear Servo (installed)
    • (1) Axial® 35T Electric Motor (installed)
    • (1) Dynamite® Electronic Speed Control with Drag Brake (installed)
  • (1) Spektrum™ STX2 Transmitter
  • (1) Product Manual

Overview

At its foundation the Axial Wraith 1.9 4x4 is the first full tube frame chassis in RC, providing the durability you need for aggressive action on tough terrain. Refining the proven 2.2 Wraith chassis design, Axial improved the ground clearance for this version by reducing the size of its skid plate and lower rails. Boatsides on the skid plate improve handling by helping the vehicle slip through and past obstacles.

Your battery mounts at the front of the chassis, for easy access and to provide the best weight distribution for aggressive climbing. For scale looks, Axial moved the servo off the top of the axle and onto the chassis - just as a full-size truck has its steering box located on the frame.

The Wraith 1.9 truck's drivetrain uses a powerful brushed 540 motor to turn its proven front and rear, single piece AR44™ axles. The pinion gear is 6mm above center, raising the ground clearance and improving driveshaft angles. Axial boosts the overall strength with metal gear construction; large, flex-reducing load bearings; increased gear surface contact; and a gear ratio that's optimized to reduce torque twist.

Adjustable oil-filled, coil over shocks allow you to tune dampening for the best handling on any track. Molded from durable S30 compound, the officially licensed Nitto Grappler tires have a large block tread that gets excellent bite on a wide range of surfaces.

The Wraith 1.9 truck looks ready to climb mountains even when it's standing still. At the front end of its polycarbonate body you'll find a molded plastic grille, radiator detail, and two large, LED-equipped headlights. Raise the hood and you'll see a replica V8 engine tucked in front of the chassis battery mount. That V8 isn't just for show. It's also a rugged receiver box that guards the model's Spektrum™ SRX200 receiver from water, dust, and debris.

The Axial Wraith 1.9 RTR comes factory-assembled and requires only a battery pack with IC3™ connector, compatible battery charger, and four AAs for the included Spektrum 2.4GHz transmitter. It's easy enough for new RC hobbyists, with the design sophistication to take experienced drivers on incredible adventures far beyond the end of the road.



Strong Tube Chassis With Forward-Mounted Battery Position

The foundation of the Wraith 1.9 platform is a refined, full-tube frame chassis - the first full tube frame in RC, with the durability you'll need for aggressive action on, up and over the rocks. The chassis mounts your battery in front, allowing easy access and providing the perfect weight distribution for aggressive climbing.

Strong Tube Chassis With Forward-Mounted Battery Position

 

Boat Sides/Skid Plate For Extra Clearance

Refining the successful 2.2 Wraith chassis design, Axial increases the ground clearance for this version by reducing the size of its skid plate and lower rails. Boatsides on the skid plate improve handling on rough terrain by helping the vehicle slip through and past obstacles.

Boat Sides/Skid Plate For Extra Clearance

 

Chassis-Mounted Servo For Realistic Looks

In pursuit of scale looks, Axial moves the servo off the top of the axle and onto the chassis - just as a full-size truck has its steering box located on the frame. The front suspension design also helps reduce bump steer as much as possible for the best driving experience.

Chassis-Mounted Servo For Realistic Looks

 

New Body Design

 

Molded Plastic Grille With Led Lights

The front end of the polycarbonate Wraith 1.9 body is highlighted by a molded plastic grille featuring two large, 5mm lamps with factory-installed LEDs. Your vehicle's realism keeps on shining after the sun goes down! Clear rectangular lenses cover two smaller, 3mm holes (LEDs for these are not included).

Molded Plastic Grille With Led Lights

 

Radiator Detail Behind Front Grille

The Axial attention to scale realism is on display throughout the Wraith 1.9 RTR's front end. Look closely into the front grille, for example, and you'll notice additional molded detail that reproduces an intricate honeycomb of (non-functional) radiator cooling fins.

Radiator Detail Behind Front Grille

 

Protective Inner Fender Wells

Molded inner fender wells help to reduce routine maintenance by keeping dirt and debris kicked up by the tires from entering the chassis. Plus, they're another example of Axial ingenuity: the wells double as part of the battery tray and feature simulated cooling vents for added realism.

Protective Inner Fender Wells

 

Receiver Box Molded As Replica V8 Engine

Accessing the vehicle's on-board electronics is as simple as pulling out two body clips and raising the hood. Inside and out, Axial finds clever ways to enhance the scale looks. For example, the waterproof receiver box does more than guard your sensitive electronics from potentially damaging off-road dust and debris. It also contributes to the thrilling scale realism by recreating the rocker arm covers and other contours of a V8 engine.

Receiver Box Molded As Replica V8 Engine

 

Included Radio Equipment

 

Spektrum™ STX2 Transmitter

The STX2 2-channel radio system offers many features of higher-end 2.4GHz radio systems.

  • Built-in 3-position throttle limiter
  • Steering and throttle rate and trim adjustments with throttle and steering reversing
  • FHSS 2.4GHz protocol for extended range and interference-free performance

Spektrum™ STX2 Transmitter

 

Spektrum™ SRX200 Receiver

The SRX200 is a 2-channel 2.4GHz receiver that operates on the FHSS modulation. It's conformal coated to help prevent damage from water, dust, and other elements, and also features an extra-long antenna lead for easy and effective antenna placement.

Spektrum™ SRX200 Receiver

 

Tactic® TSX45 Metal Gear Servo

The included, water-resistant Tactic TSX45 metal gear servo is rated at 151 oz-in of torque for massive turning power. Dual ball bearings provide smooth, precise movement for the metal gear train.

Tactic® TSX45 Metal Gear Servo

 

Included Motor And Esc

 

Axial® 35T Electric Motor

Providing an even balance of speed and crawling, the 35-turn brushed motor features a worry-free design with an integrated cooling fan for extended periods of use. Just plug and go!

Axial® 35T Electric Motor

 

Dynamite® Electronic Speed Control With Drag Brake

The Dynamite ESC is 3S LiPo capable, yet easily switched between LiPo and NiMH batteries with a simple jumper. No more complicated procedures!

  • LED light controller built-in with dual LED outputs for headlights/taillights
  • Jumper 1 provides a simple plug and play choice between LiPo or NiMh
  • Jumper 2 switches Drag Brake settings
  • Waterproof design with IC3™ plug / laser etched heat sink
  • Laser-etched heat sink

Dynamite® Electronic Speed Control With Drag Brake

 

Additional Features

 

Licensed 1.9 Nitto Trail Grappler M/T Tires *

The officially licensed Nitto Trail Grappler M/T Tires offer fantastic off-road performance while still retaining excellent composure for on-road use. They're molded in durable S30 compound with large blocks that provide excellent bite when the going gets tough. 4.7" x 1.9" (119.4 x 48.2mm).

  • 4.7" x 1.9" (119.4mm x 48.2mm)
  • S30 Compound

Licensed 1.9 Nitto Trail Grappler M/T Tires

 

Licensed KMC XD229 Machete Crawl Wheels *

Officially licensed KMC XD Machete wheels are legendary in the off-road world. They are molded in satin silver and feature stunning scale detailing on the front and a standard 12mm hex on the back.

  • 26mm (1.02") wide
  • 53.9mm (2.12") tall
KMC Wheels, Nitto® and Trail Grappler® are the property of their respective owners and are used with permission or under license by Horizon Hobby, LLC.

Licensed KMC XD229 Machete Crawl Wheels

 

AX10™ Transmission

The ultra-compact, all metal gear transmission provides a wide range of gearing choices. The overall ratio can be adjusted using different pinion and spur gear choices, allowing super high speed or competition-level crawling.

  • Final drive ratio (FDR) 42.00
  • Original SCX10 FDR was 33.06

Ax10™ Transmission

AR44™ Hi-Pinion Axles

The pinion gear is 6mm above center. This allows for added ground clearance and better driveshaft angles. The high pinion design has an increased surface contact for greater durability. The optimized gear ratio reduces torque twist at the axle which is typically seen with other small pumpkin axle designs. Metal gears are standard, as is a one piece all-metal locker front and rear. The smaller pinion is HD machine cut. Larger load bearings used around the gear set reduce flex and create a stronger drivetrain.

Ar44™ Hi-Pinion Axles

 

WB8 HD Wildboar™ Driveshafts

WB8 HD Wildboar front and rear driveshafts feature a large diameter cross pin (2x11mm) along with an M4 screw shaft (2mm hex drive) for added strength. A center splined slider floats between each end and features added material which reduces flex and fatigue.

  • 3-piece driveshaft with strengthened slider-floater tube
  • Captured cross pin design eliminates older set screw design for more durability/easy maintenance
  • Adjustable length driveline parts included in box

WB8 HD Wildboar™ Driveshafts

 

Adjustable Battery Tray

The new adjustable battery tray is now relocated lower and further forward for better weight distribution and center of gravity (COG).

  • Adjustable tray that prevents the battery from coming loose or shifting while driving.
  • Can accommodate batteries up to 32x44x147mm (3S/5,000 mAh).

Adjustable Battery Tray

 

Scale Accessories

In the box you'll find two highly detailed turbochargers. Install them under the hood for added scale realism! (Two turbochargers included but not installed. Hardware for installation not included.)

Scale Accessories

 

Dual Slipper Clutch

Our dual slipper design uses a pad on each side of the spur gear to increase surface area. This allows for more precise tuning and holding power. The spur gear features strong, 32-pitch gearing for high torque applications.

Dual Slipper Clutch

 

4-Link Rear Suspension

The suspension geometry uses a 4-link design for the rear which is optimized to reduce axle steer and torque twist. It also helps with steep off-camber climbs by having the proper amount of anti-squat and roll characteristics.

4-Link Rear Suspension

Axial Wraith 1.9 1/10 4WD RTR
Approximate Assembly Time: No assembly required
Ball Bearings: Full set included
Batteries: One 2-3S LiPo battery w/IC3 connector, or one 5-9 cell NiMH battery w/IC3 connector required
Body: Molded polycarbonate with plastic grille and molded plastic inner fender wells
Charger: Compatible with selected battery (sold separately)
Chassis: Full tube frame constructed of high-strength impact resistant composite plastic, new chassis design moves battery tray to front for easier access and better weight distribution, new lower rails and skid plates are narrower for added clearance
Completion Level: Ready-To-Run
Differential: Bevel gear
Drivetrain: 4WD Shaft Drive
Final Drive Ratio: 42:1
Gear Pitch: 32-Pitch
Ground Clearance: 2.73" (69.4mm)
Height: 8.8" (223.3mm)
Internal Gear Ratio: 2.6:1
Length: 17.8" (451.6mm)
Motor Size: 540
Motor Type: 540 size, 35T brush equipped, integrated cooling fan
Pinion: 13T
Radio: Spektrum FHSS 2.4GHz STX2 2-ch with 3-position throttle limiter, steering & throttle rate and trim adjustments, high torque (151 oz-in) water resistant, dual ball bearing steering servo
Servos: Tactic TSX45 high-torque metal gear dual ball bearing steering servo
Shock Type: Clear coated polished aluminum body oil-filled King shocks with precision machined pistons, pre-load tuning and ride height adjustable
Size/Scale: 1/10
Speed Control: Dynamite AE-5L 3S capable Forward/Reverse with drag brake, switchable between LiPo & NiMH batteries with a jumper, LED light controller with headlight/ taillight outputs
Spur Gear: 56T
Suspension: Multi link solid axle 4-link, optimized to reduce axle steer and torque twist
Tire Compound: Sticky R35 firmness compound
Tire Diameter: Mounting Bead Diameter 1.9" (48.2mm), Outer Diameter 4.7" (119.4mm)
Tire Tread: Licensed Nitto Grappler aggressive large block tread design, foam inserts
Vehicle Type: 1/10 scale 4WD crawler
Water-Resistant: Yes
Weight: 4.65lb (2.1kg)
Wheel Diameter: 2.12" (53.9mm)
Wheel Hex Size: 12mm Hex
Wheel Type: KMC XD229 Machete
Wheel Width: 1.2" (26mm)
Wheelbase: 12.13" (308mm)
Width: 8.8" (223.3mm)

 


배송안내

- 배송비 : 기본배송료는 3,000원 입니다. (도서,산간,오지 일부지역은 배송비가 추가될 수 있습니다)

- 본 상품의 평균 배송일은 1.5일 입니다.(입금 확인 후) 설치 상품의 경우 다소 늦어질수 있습니다.[배송예정일은 주문시점(주문순서)에 따른 유동성이 발생하므로 평균 배송일과는 차이가 발생할 수 있습니다.]

- 본 상품의 배송 가능일은 1일 입니다. 배송 가능일이란 본 상품을 주문 하신 고객님들께 상품 배송이 가능한 기간을 의미합니다. (단, 연휴 및 공휴일은 기간 계산시 제외하며 현금 주문일 경우 입금일 기준 입니다.)

교환 및 반품안내

- 상품 택(tag)제거 또는 개봉으로 상품 가치 훼손 시에는 상품수령후 7일 이내라도 교환 및 반품이 불가능합니다.

- 저단가 상품, 일부 특가 상품은 고객 변심에 의한 교환, 반품은 고객께서 배송비를 부담하셔야 합니다(제품의 하자,배송오류는 제외)

- 일부 상품은 신모델 출시, 부품가격 변동 등 제조사 사정으로 가격이 변동될 수 있습니다.

- 수입제품의 경우, 제품 및 본 상품의 박스 훼손, 분실 등으로 인한 상품 가치 훼손 시 교환 및 반품이 불가능 하오니, 양해 바랍니다. 

- 일부 특가 상품의 경우, 인수 후에는 제품 하자나 오배송의 경우를 제외한 고객님의 단순변심에 의한 교환, 반품이 불가능할 수 있사오니, 각 상품의 상품상세정보를 꼭 참조하십시오. 

환불안내

- 상품 청약철회 가능기간은 상품 수령일로 부터 7일 이내 입니다.

AS안내

- 소비자분쟁해결 기준(공정거래위원회 고시)에 따라 피해를 보상받을 수 있습니다.

- A/S는 판매자에게 문의하시기 바랍니다.

- 개봉 후 반품/교환 불가

이미지 확대보기[엑시얼 레이스] AXIAL 1/10 Wraith 1.9 4WD Brushed RTR, Orange AXI90074T1

[엑시얼 레이스]  AXIAL 1/10 Wraith 1.9 4WD Brushed RTR, Orange AXI90074T1
  • [엑시얼 레이스]  AXIAL 1/10 Wraith 1.9 4WD Brushed RTR, Orange AXI90074T1
닫기

비밀번호 인증

글 작성시 설정한 비밀번호를 입력해 주세요.

닫기

장바구니 담기

상품이 장바구니에 담겼습니다.
바로 확인하시겠습니까?

무이자할부안내
브랜드바로가기
SAVOX
MSTyeahracing
GPMintegy
XTRA SPEEDrc4wd
TRAXXAS
LOSI지메이드부품
AXIAL
ARRMA
SPARMAX
카카오상담
수리튜닝문의